Titanium
|
Grades 1, 2, 3 and 4 titanium belong to the class of commercially pure titanium. The other grades are classed as alloys. Pure titanium is used for applications that require a metal that is highly resistant to corrosion, while alloys are used in the manufacture of products that require a high level of mechanical strength in addition to resistance to corrosion and heat |
| Mechanical Properties | Gr.1 |
Gr.2 |
Gr.5 |
Gr.7 |
Gr.9 |
Gr.12 |
Gr.23 |
Resistance to traction (MPa) |
240.00 |
345.00 |
895.00 |
345.00 |
620.00 |
483.00 |
828.00 |
Yield stress (MPa) |
170.00 |
275.00 |
825.00 |
275.00 |
483.00 |
345.00 |
759.00 |
Elongation (in 4D, min, %) |
24.00 |
20.00 |
10.00 |
20.00 |
15.00 |
18.00 |
10.00 |
Reduction in areas (min, %) |
30.00 |
30.00 |
25.00 |
30.00 |
25.00 |
25.00 |
15.00 |
Interpolated hardness * |
Rb70 |
Rb80 |
Rc36 |
Rb80 |
Rc28 |
Rc17* |
|
Products
|
Screws, Nuts, Washers
|
DIN 931, DIN 933, DIN 963, DIN 7971, DIN 7973, DIN 7976, DIN 912, DIN 913, DIN 975, etc./ DIN 934, DIN 439, DIN 1587, DIN 315, DIN 985, etc./ DIN 125, DIN 127, etc.
|
|---|---|
|
Bars / Billets
|
ASTM B348, ASME SB348, ASTM F67, ASTM F136, AMS 4928.
|
|
Strips / Sheets / Plates
|
ASTM B265, ASTM, AMS 4911, MIL-T-9046, ASTM F67, F136.
|
|
Tubes / Pipes
|
ASTM B348, ASME SB348, ASTM F67, ASTM F136, AMS 4928.
|
|
Wire
|
ASTM B348/ASME SB348, ASTM B863, AWS A5.16, AMS 4951.
|
|
Others
|
Rings, Bridles, Cages, Anodes, Parts As Built, etc.
|